mmbz5225 to mmbz5267 www.vishay.com vishay semiconductors rev. 1.7, 11-feb-13 1 document number: 85772 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? silicon planar power zener diodes ? standard zener voltage tolerance is 5 % with a b suffix (e.g.: mmbz5225b), suffix c is 2 % tolerance. ? high temperature soldering guaranteed: 260 c/4 x 10 s at terminals ? aec-q101 qualified ? esd capability according to aec-q101: human body model > 8 kv machine model > 800 v ? base p/n-e3 - rohs-compliant, commercial grade ? base p/n-he3 - rohs-compliant, aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 primary characteristics parameter value unit v z range nom. 3 to 75 v test current i zt 1.7 to 20 ma v z specification thermal equilibrium int. construction single 12 3 ordering information device name ordering code taped units per reel minimum order quantity mmbz5225 to mmbz5267 mmbz5225b-e3-08 to mmbz5267b-e3-08 3000 (8 mm tape on 7" reel) 15 000/box mmbz5225c-e3-08 to mmbz5267c-e3-08 mmbz5225b-he3-08 to mmbz5267b-he3-08 mmbz5225c-he3-08 to mmbz5267c-he3-08 mmbz5225b-e3-18 to mmbz5267b-e3-18 10 000 (8 mm tape on 13" reel) 10 000/box mmbz5225c-e3-18 to mmbz5267c-e3-18 mmbz5225b-he3-18 to mmbz5267b-he3-18 mmbz5225c-he3-18 to mmbz5267c-he3-18 package package name weight molding compound flammability rating moisture sensitivity level soldering conditions sot-23 8.8 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation on fr - 5 board using recommended solder pad layout p tot 225 mw on alumina substrate p tot 300 mw zener current see table electrical characteristics thermal resistance, junction to ambient air on fr - 5 board using recommended solder pad layout r thja 556 k/w junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c operating temperature range t op - 55 to + 150 c
mmbz5225 to mmbz5267 www.vishay.com vishay semiconductors rev. 1.7, 11-feb-13 2 document number: 85772 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ?maximum v f = 0.9 v, at i f = 10 ma (1) measured at thermal equilibrium (2) the zener impedance is deri ved from the 1 khz ac voltage which results when an ac current having an rms value equal to 10 % of the zener current (i zt1 or i zt2 ) is superimposed on i zt1 or i zt2 . zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse leakage current dynamic resistance (2) temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 ? vz v ma a v ? %/c nom. max. max. max. typ. mmbz5225 18e 3 20 0.25 50 1 30 1600 - 0.075 mmbz5226 8a 3.3 20 0.25 25 1 28 1600 - 0.07 mmbz5227 8b 3.6 20 0.25 15 1 24 1700 - 0.065 mmbz5228 8c 3.9 20 0.25 10 1 23 1900 - 0.06 mmbz5229 8d 4.3 20 0.25 5 1 22 2000 - 0.055 mmbz5230 8e 4.7 20 0.25 5 2 19 1900 0.030 mmbz5231 8f 5.1 20 0.25 5 2 17 1600 0.030 mmbz5232 8g 5.6 20 0.25 5 3 11 1600 0.038 mmbz5233 8h 6 20 0.25 5 3.5 7 1600 0.038 mmbz5234 8j 6.2 20 0.25 5 4 7 1000 0.045 mmbz5235 8k 6.8 20 0.25 3 5 5 750 0.05 mmbz5236 8l 7.5 20 0.25 3 6 6 500 0.058 mmbz5237 8m 8.2 20 0.25 3 6.5 8 500 0.062 mmbz5238 8n 8.7 20 0.25 3 6.5 8 600 0.065 mmbz5239 8p 9.1 20 0.25 3 7 10 600 0.068 mmbz5240 8q 10 20 0.25 3 8 17 600 0.075 mmbz5241 8r 11 20 0.25 2 8.4 22 600 0.076 mmbz5242 8s 12 20 0.25 1 9.1 30 600 0.077 mmbz5243 8t 13 9.5 0.25 0.5 9.9 13 600 0.079 mmbz5244 8u 14 9 0.25 0.1 10 15 600 0.082 mmbz5245 8v 15 8.5 0.25 0.1 11 16 600 0.082 mmbz5246 8w 16 7.8 0.25 0.1 12 17 600 0.083 mmbz5247 8x 17 7.4 0.25 0.1 13 19 600 0.084 mmbz5248 8y 18 7 0.25 0.1 14 21 600 0.085 mmbz5249 8z 19 6.6 0.25 0.1 14 23 600 0.086 mmbz5250 81a 20 6.2 0.25 0.1 15 25 600 0.086 mmbz5251 81b 22 5.6 0.25 0.1 17 29 600 0.087 mmbz5252 81c 24 5.2 0.25 0.1 18 33 600 0.087 mmbz5253 81d 25 5 0.25 0.1 19 35 600 0.089 mmbz5254 81e 27 4.6 0.25 0.1 21 41 600 0.09 mmbz5255 81f 28 4.5 0.25 0.1 21 44 600 0.091 mmbz5256 81g 30 4.2 0.25 0.1 23 49 600 0.091 mmbz5257 81h 33 3.8 0.25 0.1 25 58 700 0.092 mmbz5258 81j 36 3.4 0.25 0.1 27 70 700 0.093 mmbz5259 81k 39 3.2 0.25 0.1 30 80 800 0.094 mmbz5260 18f 43 3 0.25 0.1 33 93 900 0.095 mmbz5261 81m 47 2.7 0.25 0.1 36 105 1000 0.095 mmbz5262 81n 51 2.5 0.25 0.1 39 125 1100 0.096 mmbz5263 81p 56 2.2 0.25 0.1 43 150 1300 0.096 mmbz5264 81q 60 2.1 0.25 0.1 46 170 1400 0.097 mmbz5265 81r 62 2 0.25 0.1 47 185 1400 0.097 mmbz5266 81s 68 1.8 0.25 0.1 52 230 1600 0.097 mmbz5267 81t 75 1.7 0.25 0.1 56 270 1700 0.098
mmbz5225 to mmbz5267 www.vishay.com vishay semiconductors rev. 1.7, 11-feb-13 3 document number: 85772 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward characteristics fig. 2 - admissible power dissipation vs. ambient temperature package dimensions in millimeters (inches): sot-23 18114 ma 10 3 10 2 10 -1 10 -2 10 -3 10 -4 10 -5 10 1 i f v f 0 0.2 0.4 0.6 0.8 1v t j = 100 c t j = 25 c 18672 0 100 200 c 250 mw 200 150 100 50 0 p tot t am b foot print recommendation: rev. 8 - date: 23. s ept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
